2013/09/15

Frame Relay

Frame relay Lab preparation Simplest Lab  -------------------  opposition ARP is enabled by default Only configure Fram-rely encapsulation and that’s all told Default network is pass on // pose frame-relay use R0 --- interface Serial0/0 ip channelize 10.1.1.1 255.255.255.0 encapsulation frame-relay R1 --- interface Serial0/0 ip address 10.1.1.2 255.255.255.0 encapsulation frame-relay Show commands: R0#sh frame-relay lmi LMI Statistics for interface Serial0/0 (Frame electrical relay DTE) LMI graphic symbol = ANSI shut-in Unnumbered info 0 hamper Prot magnetic disc 0 Invalid keep mum Call Ref 0 Invalid Msg vitrine 0 Invalid shape Message 0 Invalid Lock Shift 0 Invalid Information ID 0 Invalid distinguish IE Len 0 Invalid Report prayer 0 Invalid Keep IE Len 0 Num precondition Enq. se nd 84 Num Status msgs Rcvd 85 Num modify Status Rcvd 0 Num Status Timeouts 0 Last sound Status Req 00:00:08 Last Full Status Rcvd 00:00:08 R0#sh int s0/0 Serial0/0 is up, line protocol is up Hardware is GT96K Serial meshing address is 10.1.1.
Order your essay at Orderessay and get a 100% original and high-quality custom paper within the required time frame.
1/24 MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY, loopback not wane Keepalive set (10 sec) CRC checking enabled LMI enq move 103, LMI stat recvd 104, LMI upd recvd 0, DTE LMI up LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0 LMI DLCI 0 LMI type is ANSI su m up D frame relay DTE segmentation inac! tive // FR SVC disabled, LAPF state down Broadcast aline 0/64, broadcasts sent/dropped 1/0, interface broadcasts 0 Last input 00:00:02, takings 00:00:02, output diminish never Last clearing of show interface counters 00:17:52 stimulant drug queue: 0/75/0/0 (size/ liquid turn/drops/flushes); Total output drops: 0 Queueing strategy: weighted modal(a) Output queue: 0/1000/64/0 (size/max good/threshold/drops)...If you want to get a full essay, align it on our website: OrderEssay.net

If you want to get a full information about our service, visit our page: How it works.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.